To Next Page

To Previous Page

Clock Menu

Use the clock menu to set thermostat’s internal clock.

Figure 26. Clock Setup

Seng the Clock

1. Press any buon to take thermostat out of sleep mode.

2. Press FAN buon for 5 seconds unl SETUP appears in status display line.

3. Use pq buons to select CLOCK in status display line.

4. Press SELECT. DAY will be displayed

5. Press pq buons. TIME will be displayed.

6. Use the pq buons to select the current me.

7. Press SELECT, DONE, DONE.

INFO Menu

The INFO menu displays informaon about the thermostat. Use the  buons to scroll through

the various items.

• MODEL NTBZ48.

• VERSION Thermostat rmware version.

• ZWAVE Z-Wave rmware version.

• NODE ID Z-Wave Node ID.

• HOME ID Z-Wave Home ID.

• SYSTEM TYPE displays current System Type seng.

• If System Type = Standard, FAN TYPE displays current Fan Type seng.

• If System Type = Heat Pump, CHANGEOVER TYPE displays current Change Over seng.

• Baery xx% = Baery Level (If baery powered).

MODE

FAN

Select

Done

CLOCK

USE THE 

BUTTONS TO CHANGE

TO THE DESIRED MENU

ITEM, THEN PRESS

SELECT

MENU CHOICES

ARE DISPLAYED IN THE

STATUS DISPLAY LINE

PUSH AND HOLD

FOR 5 SECONDS

NuTone NTBZ48 User Manual

Other manuals for NuTone NTBZ48