NUVE EN 032 - 4 Symbols and Labels; 5 Installation; Environmental Conditions; Handling and Transportation

8
4. SYMBOLS AND LABELS
Symbol in the operating instructions:
Attention, general hazard area.
This symbol refers to safety relevant warnings and indicates possibly dangerous
situations. The non-adherence to these warnings can lead to material damage and injury
to personal.

Symbol in the operating instructions:
This symbol refers to important circumstances.
Labels on the products:
Hot Surface
EN 032N Fuses
EN 055N Fuses
EN 120N Fuses
Topraklı Priz
(2x1,5 A)
(2 x 2 A)
(2 x 3 A)
5. INSTALLATION
5.1. ENVIRONMENTAL CONDITIONS
The instrument is design to operate safely under the following conditions:
• Indoor use only
• Ambient temperature: 5°C to 40°C
• Maximum relative humidity for temperature up to 31°C: 80%
• Maximum altitude: 2000 m
• Temperature for maximum performance: 15°C / 25°C

The instrument is designed to operate in 20°C (±5°C) laboratory conditions. The
efficiency of the unit may decrease if the ambient temperature exceeds the limits.
5.2. HANDLING AND TRANSPORTATION
All handling and transportation must be carried out by using proper equipment and experienced
staff. The instrument must be supported underneath and never be turned upside down.