9
5.3. UNPACKING
Remove the cardboard box packing and the second nylon wrapping around the instrument.
Ensure that no damage has occurred during transportation. The below mentioned are provided
with the instrument, please check them;
• 1 ea. user’s manual and warranty
• 1 ea. power cord
• 2 ea. shelves
• 4 ea. shelf carriers
5.4. MAINS SUPPLY
The instrument requires 230V, 50/60 Hz. Please make sure that the supplied mains matches the
required power ratings which are written on the name of plate of the instrument located at the
back of the incubator.
Always plug-in the instrument to correctly grounded sockets.
A supply fitted with a circuit breaker should be used for protection against indirect
contact in case of isolation fault.
5.5. POSITIONING
• Check that the positioning is suitable for the users.
• Check that the instrument is stable on its four feet. If necessary, provide stable standing by
adjusting the pedestal heights.
• Check that the user is able to follow the operation even when he deals with something else.
• Check that the positioning of the device prevents interference with other equipment in the
near surrounding.
• The bench where the instrument is positioned should be resistant to the weight of the
instrument and vibration free.
• Leave at least 20 cm free space between the equipment and wall.
To Next Page
Loading...
