11
5.4. MAINS SUPPLY
The instrument requires 400V.
Please make sure that the supplied mains matches the required power ratings which are written
on the name of plate of the instrument located at the back of the instrument.
Always plug-in the instrument to correctly grounded sockets.
A supply fitted with a circuit breaker should be used for protection against indirect
contact in case of isolation fault.
5.5. POSITIONING
Check that the positioning is suitable for the users.
Check that the instrument is stable on its four pedestals. If necessary, provide stable standing
by adjusting the pedestal heights.
Check that the user will be able to follow up the operation even when he deals with something
else.
Check that the positioning of the device prevents interference with other equipment in the
near surrounding.
To Next Page
