10
Move the device intended place with wheel help.
After carry away the device to assembler unit, accommodate the fixing screws and together
with sitting stillages place the device on the floor smoothly like below figure. Please connect
to electric, air, water and drain connections.
Figure 2
5.3. UNPACKING
Remove the cardboard box packing and the second nylon wrapping around the instrument.
Ensure that no damage has occurred during transportation. The below mentioned are provided
with the instrument, please check them;
1 ea. user’s manual and warranty
1 ea. water tank
1 ea. tank stillage
1 ea. power cable
1 ea. water inlet hose
1 ea. water drain hose
Teflon hose (5 m)
Hepa filter
Clamping ring
To Next Page
