4
CONTENT
Page
1. INTRODUCTION 5
1.1. USE AND FUNCTION 5
2. TECHNICAL SPECIFICATIONS 6
2.1. TECHNICAL SPECIFICATIONS TABLE 6
3. PRECAUTIONS AND LIMITATIONS ON USE 6
4. SYMBOLS AND LABELS 7
5. INSTALLATION 8
5.1. ENVIRONMENTAL CONDITIONS 8
5.2. HANDLING AND TRANSPORTATION 8
5.3. UNPACKING 10
5.4. MAINS SUPPLY 11
5.5. POSITIONING 11
5.6. GENERAL PRESENTATION 12
5.7. CONNECTION TO THE MAINS, WATER AND AIR SUPPLY 15
5.7.1. CONNECTION TO THE MAINS 15
5.7.2. CONNECTION TO WATER SUPPLY 15
5.7.3. CONNECTION TO AIR SUPPLY 15
6. OPERATING PRINCIPLES 15
6.1. PRIOR TO OPERATION 15
6.2. OPERATION PHASES 23
6.3. SAMPLE REPORT 24
6.4. INSTRUCTIONS ON DRYING 25
6.4.1. DRYING IN STERILIZATION CONTAINERS 25
6.4.2. TEXTILES 26
6.4.3. INSTRUMENTS 26
6.4.4. LOADING THE AUTOCLAVE 26
6.4.5. LOADING CONTAINERS WITH SOFT STERILIZATION PACKAGES 27
6.4.6. STACKING STERILIZATION CONTAINERS 28
7. PERIODIC MAINTENANCE AND CLEANING 28
7.1. PERIODIC MAINTENANCE 28
7.2. PERIODIC CONTROL 28
7.3. CLEANING 28
8. DISPOSAL MANAGEMENT CONCEPT 30
9. TROUBLESHOOTING 30
9.1. WARNING MESSAGES AND EXPLANATIONS 30
9.2. ERROR CODES 30
10. ELECTRICAL CIRCUIT DIAGRAM 33
To Next Page
Loading...
