4. To save your edits, press and hold Menu for 1 second and “101” will be displayed.
Select the preset number (101-150) that you would like to save your edits to and hold
Menu again for 1 second.
Note: Once saved, the edited preset will be available for recall. If the cooking process has
nished, the preset is no longer editable.
If you saved a preset to a lled memory slot, the new preset will override the previous one.
Any edits to a preset program (1~100) can only be saved and stored into program numbers
101~150. You cannot save an adjusted preset to its original preset number.
Sear
Sear 1 is ONLY available at the beginning of the cooking process. Sear 2 is ONLY
available at the end of the cooking process.
Sear 1 & 2 can be used together to sear your food before and after the cooking process.
Sear 1
The default temperature and time is 425F for 5 minutes.
1. Adjust your cooking temperature and time.
2. Press Sear to engage the Sear 1 function.
3. Adjust the Sear temperature and time up to a maximum of 425F and 30 minutes.
4. Press START/PAUSE to begin. The Brio will start preheating. Once preheated, “Sear
1” and “:” will be ashing.
• Once the Sear 1 cycle is nished, the Brio will automatically go into the regular
cooking temperature and time set on step 1.
• When the Brio has nished cooking, it will beep 3 times and the LED display will
show “End”.
ADVANCED SETTINGS
20 | nuwavenow.com
To Next Page
Loading...
