nvent 910 Series - Page 24

24 | nVent.com
4.3.6 “MISC. SETUP…” SUB-MENU
The “Misc. Setup” sub-menu is used to configure miscellaneous parameters.
Table 4.9 Misc. Setup Sub-Menu
TEMP UNITS = {°C or °F}
VERSION = V3.16.3
EXT. INPUT = {NOT USED, INHIBIT or FORCE ON}
FLASH ALARM OUTPUT = {YES or NO}
ALARM OUTPUT = {N.C. or N.O.}
LANGUAGE = {ENGLISH or FRANCAIS}
P
ASSCODE = {0000 to 9999} (only if 0 or database is unlocked)
SCROLL DELAY = {0.07 to 0.25} S
LOAD DEFAULTS
---- END ----
CONTROL SETPOINT = 20°C
LO TS 1 = –10°C
LO LOAD = 1.0 A
HI GFI = 50 mA
GFI TRIP = 75 mA
TS ALARMS CONFIG…
OTHER ALARMS CONFIG…
POINT SETUP…
MISC SETUP…
COMMUNICA
TIONS SETUP…
---- END ----