Nvidia DGX H100

Chapter 3. First Boot Setup
This section provides information about the set up process after you rst boot the DGX H100 system.
While NVIDIA partner network personnel or NVIDIA eld service engineers will install the DGX H100
system at the site and perform the rst boot setup, the rst boot setup instructions are provided here
for reference and to support any reimaging of the server.
3.1. System Setup
These instructions describe the setup process that occurs the rst time the DGX H100 system is
powered on after delivery or after the server is re-imaged.
Be prepared to accept all End User License Agreements (EULAs) and to set up your username and pass-
word. To preview the EULA, visit https://www.nvidia.com/en-us/data-center/dgx-systems/support/
and click the DGX EULA link.
1. Connect to the DGX H100 console as explained in Connecting to the Console.
2. Power on the DGX H100 system in one of the following ways:
▶ Using the physical power button.
23