Nvidia DGX H100

Chapter 6. Using the Baseboard
Management Controller
(BMC)
The NVIDIA DGX H100 system comes with a baseboard management controller (BMC) for monitor-
ing and controlling various hardware devices on the system. It monitors system sensors and other
parameters.
6.1. Connecting to the BMC
Here are the steps to connect to the BMC on a DGX H100 system.
Before you begin, ensure that you connected the BMC network interface controller port on the DGX
system to your LAN.
1. Open a browser within your LAN and enter the IP address of the BMC in the location.
The BMC is supported on the following browsers:
▶ Internet Explorer 11 and later
▶ Firefox 29.0 (64-bit) and later
▶ Google Chrome 7.0.3396.87 (64-bit) and later
2. Log in.
The BMC dashboard opens.
39