Nvidia DGX H100 User Manual

Chapter 4. Quickstart and Basic
Operation
This chapter provides basic requirements and instructions for using the DGX H100 system, including
how to perform a preliminary health check and how to prepare for running containers. Go to the DGX
documentation for additional product documentation.
4.1. Installation and Conguration
Before you install DGX H100, ensure you have given all relevant site information to your Installation
Partner.
Important: Your DGX H100 System must be installed by NVIDIA partner network personnel or NVIDIA
eld service engineers. If not performed accordingly, your hardware warranty will be voided.
4.2. Registration
To obtain support for your DGX H100, follow the instructions for registration in the Entitlement Cer-
tication email that was sent as part of the purchase.
Registration allows you to access the NVIDIA Enterprise Support Portal, obtain technical support, get
software updates, and set up an NGC for DGX systems account. If you did not receive the informa-
tion, open a case with the NVIDIA Enterprise Support Team at https://www.nvidia.com/en-us/support/
enterprise/.
To obtain support for your DGX H100 system, follow the instructions for registration in the Entitlement
Certication email that was sent as part of the purchase.
Registration allows you to access the NVIDIA Enterprise Support Portal, obtain technical support, get
software updates, and set up an NGC for DGX systems account. If you did not receive the informa-
tion, open a case with the NVIDIA Enterprise Support Team at https://www.nvidia.com/en-us/support/
enterprise/.
Refer to Customer Support for contact information.
27

Nvidia DGX H100 Specifications

General

GPU	8x NVIDIA H100 Tensor Core GPUs
GPU Memory	640 GB HBM3 (80GB per GPU)
System Memory	2 TB DDR5
Form Factor	6U rackmount
Storage	30TB NVMe SSD
Power Supply	10kW
Interconnect	NVLink 4.0