25
Password Settings
This entry for setting Supervisor password and User password
Load Optimal Defaults
Use this menu to load the BIOS default values these are setting for optimal performances
system operations for performance use.
Save changes and Exit
Save CMOS value changes to CMOS and exit setup.
Discard changes and Exit
Abandon all CMOS value changes and exit setup.
3-4 Standard CMOS Features
The items in Standard CMOS Setup Menu are divided into several categories. Each
category includes no, one or more than one setup items. Use the arrow keys to
highlight the item and then use the <PgUp> or <PgDn> keys to select the value you
want in each item.
CMOS Setup Utility-Copyright(c) 1985-2005 America Megatrends, Inc
Standard BIOS Features
Item Help
System Date Tue.01/01/2002
System Time 23:10:51
Primary IDE Master Not Detected
Primary IDE Slave Not Detected
SATA Channel 1 None
SATA Channel 2 None
Floppy A 1.44M,3.5in
System memory 512MB
Size
Use [ENTER], [TAB] or
[SHIFT-TAB] to select a field. Use
[+] or [-] to configure system date.
āā<->: Move Enter: Select +/-/: Value F10: Save ESC: Exit F1: General
Help F7: Previous values F8: Fail-safe Defaults F9: Optimized Defaults
Date
The date format is <day><month><date><year>.
Day
Day of the week, from Sun to Sat, determined by BIOS. Read-only.
Month
The month from Jan. through Dec.
Date
The date from 1 to 31 can be keyed by numeric function keys.
Year
The year depends on the year of the BIOS.
Time
The time format is <hour><minute><second>.
Primary IDE Master
While entering setup, BIOS auto detects the presence of IDE devices. This displays
the status of auto detection of IDE device.
To Next Page
Loading...
Need help?
General
