39
Then press F7 and the following dialogue should appear: All data on new (or
added)disks may be overwritten. Continue? Press Enter to overwrite the data:
Another dialogue: Clear MBR? appears, press Enter and the second window should
appear:
Type B to boot the disks enabled the RAID function, or press Enter to have a view of
Array Detail information
Step 3.
Making RAID driver diskette before Install WindowsXP/2000
Before you install the Windows XP or Windows 2000, you will need to make a RAID
driver diskette before you start to install the Operating System.
How to make a RAID driver diskette?
1: Insert the diskette which is being formatted in floppy drive on a system which can
start OS.
2: After booting OS insert the bundle CD in your CD-ROM
3: Copy all the files from \NF-orce4\RAIDDisk to floppy diskette
Once you have the SATA driver diskette ready, you may start to install Windows XP or
Windows 2000 on your System.
Installation of Windows XP/ Windows 2000
For installation of Windows XP or Windows 2000, please insert Windows XP or
Windows 2000 CD into the CD-ROM drive. Then remove the floppy diskette, and boot
the system. At the very beginning, you will see the message at the bottom of screen,
“Press F6 if you need to install a third party SCSI or RAID driver….”
At this moment, please press <F6> key and follow the instructions of Windows XP or
Windows 2000 for the proper installation.
To Previous Page
Loading...
Need help?
General
