Hardware Installation
Installation and initialization of ConnectX-6 adapter cards require attention to the mechanical
attributes, power specification, and precautions for electronic equipment.
Safety Warnings
Please observe all safety warnings to avoidinjury and prevent damage to system components. Note
that not all warnings are relevant to all models.
Unable to render include or excerpt-include. Could not retrieve page.
Installation Procedure Overview
The installation procedure of ConnectX-6 adapter cards involves the following steps:
Step Procedure Direct Link
1 Check the system’s hardware and software
requirements.
System Requirements
2 Pay attention to the airflow consideration within
the host system
Airflow Requirements
3 Follow the safety precautions Safety Precautions
4 Unpack the package Unpack the package
5 Follow the pre-installation checklist Pre-Installation Checklist
6 (Optional) Replace the full-height mounting
bracket with the supplied short bracket
Bracket Replacement Instructions
7 Install the ConnectX-6 PCIe x8/x16 adapter card
in the system
ConnectX-6 PCIe x8/x16 Adapter Cards
Installation Instructions
Install the ConnectX-6 2x PCIe x16 Socket Direct
adapter card in the system
ConnectX-6 Socket Direct (2x PCIe x16)
Installation Instructions
8 Connect cables or modules to the card Cables and Modules
9 Identify ConnectX-6 in the system Identifying Your Card
Safety warnings are provided here in the English language. For safety warnings in other
languages, refer to the Adapter Installation Safety Instructions document available on
mellanox.com.
To Next Page
Loading...
