1.
2.
3.
4.
5.
The following is an example of an unattended installation session.
Open a CMD console->Click Start->Task Manager File->Run new task->and enter CMD.
Install the driver. Run:
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe /S /v/qn
[Optional]Manually configure your setup to contain the logs option:
_All_Arch.exe/S/v/qn/v”/l*vx[Log-File]"" v:shapes="_x0000_s1026">
[Optional]if you wish to control whether to install ND provider or not (i.e.,
MT_NDPROPERTY
default value is True
).
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe /vMT_NDPROPERTY=1
[Optional]If you do not wish to upgrade your firmware version (i.e.,
MT_SKIPFWUPGRDdefault
value is False
).
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe /vMT_SKIPFWUPGRD=1
Installation Results
Upon installation completion, you can verify the successful addition of the network card(s) through the
Device Manager. Theinffiles can be located at:
%ProgramFiles%\Mellanox\MLNX_WinOF2\Drivers\
To see the Mellanox network adapters, display the Device Manager and pull down the “Network
adapters” menu.
If no reboot options are specified, the installer restarts the computer whenever necessary
without displaying any prompt or warning to the user.
To control the reboots, use the
/norestart
or
/forcerestart
standard command-line options.
To Next Page
Loading...
