Adapter Card
Power
Voltage: 12V, 3.3VAUX
Power Cable
Typical Power
b
Passive Cables 21.6W
Maximum Power Please refer to ConnectX-6 VPI Power Specifications (requires
MyMellanox login credentials)
Voltage: 3.3Aux
Maximum current:100mA
Maximum power available through QSFP56 port: 5W
Environmental Temperature Operational 0°C to 55°C
Non-operational -40°C to 70°C
Humidity: 90% relative humidity
c
Airflow (LFM) /
Ambient
Temperature
Cable Type
Airflow Direction
Heatsink to Port Port to Heatsink
Passive Cables 350 LFM / 55°C 250 LFM / 35°C
Mellanox Active
2.75W Cables
550 LFM / 55°C 250 LFM / 35°C
Regulatory Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM / KC
RoHS: RoHS Compliant
Notes: a.The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better bit
error rates and longer cable reaches. This supplemental feature only initiates when connected to
another Mellanox InfiniBand product.
b.Typical power for ATIS traffic load.
c. For both operational and non-operational states.
Adapter Card and Bracket Mechanical Drawings
and Dimensions
All dimensions are in millimeters. The PCB mechanical tolerance is +/- 0.13mm.
For the 3D Model of the card, please refer to http://www.mellanox.com/page/3d_models.
To Next Page
Loading...
