Nvidia Mellanox ConnectX-6 MCX654106A-ECAT - MCX654106 A-ECAT Specifications

78
Active Auxiliary PCIe
Connection Card
Power
Typical Power 3.0W
Maximum Power 4.0W
Environmental
Temperature
Operational 0°C to 55°C
Non-operational -40°C to 70°C
Humidity: 90% relative humidityc
Airflow (LFM) /
Ambient
Temperature
Cable Type
Airflow Direction
Heatsink to Port Port to Heatsink
Passive Cables 700 LFM / 55°C 400 LFM / 35°C
Mellanox Active
4.7W Cables
1050 LFM / 55°C
600 LFM / 48°C
400 LFM / 35°C
Regulatory Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM// KC
RoHS: RoHS Compliant
Notes: a.The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better bit
error rates and longer cable reaches. This supplemental feature only initiates when connected to
another Mellanox InfiniBand product.
b.Typical power for ATIS traffic load.
c. For both operational and non-operational states.
MCX654106A-ECAT Specifications
Physical Adapter Card Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
Auxiliary PCIe Connection Card Size: 5.09 in. x 2.32 in. (129.30mm x 59.00mm)
Two Cabline CA-II Plus harnesses (white and black) Length: 35cm
Connector: Dual QSFP56 InfiniBand and Ethernet (copper and optical)
Protocol Support
InfiniBand: IBTA v1.3
a
Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR
(10Gb/s per lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR
(25Gb/s per lane) port, HDR100 (2 lane x 50Gb/s per lane)
Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of supplying the
required power and airflow as stated inthe below table.
