Protocol Support
InfiniBand: IBTA v1.3
a
Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/
s per lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s
per lane) port, HDR100 (2 lane x 50Gb/s per lane), HDR (50Gb/s per lane) port
Ethernet: 200GBASE-CR4, 200GBASE-KR4, 200GBASE-SR4, 100GBASE-CR4,
100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4,
40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2,
25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR,
10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR
Data Rate InfiniBand SDR/DDR/QDR/FDR/EDR/HDR100/HDR
Ethernet 1/10/25/40/50/100/200 Gb/s
Gen3: SERDES @ 8.0GT/s/, x16 lanes (2.0 and 1.1 compatible)
Adapter Card Power Voltage: 12V, 3.3VAUX
Power Cable
Typical Power
b
Passive Cables 27.1W
Maximum Power Please refer to ConnectX-6 VPI Power Specifications (requires
MyMellanox login credentials)
Voltage: 3.3Aux
Maximum current:100mA
Maximum power available through QSFP56 port: 5W
Active Auxiliary PCIe
Connection Card
Power
Typical Power 3.0W
Maximum Power 4.0W
Environmental Temperature Operational 0°C to 55°C
Non-operational -40°C to 70°C
Humidity: 90% relative humidity
c
Airflow (LFM) /
Ambient
Temperature
Cable Type
Airflow Direction
Heatsink to Port Port to Heatsink
Passive Cables 600 LFM / 55°C 350 LFM / 35°C
Mellanox Active
4.7W Cables
600 LFM / 55°C
d
350 LFM / 35°C
Regulatory Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM / KC
RoHS: RoHS Compliant
To Next Page
Loading...
