Quadro K4000/K5000/K6000 SDI DU-05337-002_v01
|
8
Chapter 02 : NVIDIA Graphics-to-SDI
2 Connect your display.
Connect the display to one of the available digital connectors on the graphics card as
shown in Figure 2.3. You may need a VGA-DP or DVI-DP display dongle.
Figure 2.3 Digital Connectors Available for Displays
Step 3: Install the NVIDIA Graphics Drivers
If you will be installing new graphics drivers for the NVIDIA Quadro SDI card, it is
highly recommended that you uninstall any previous version of the NVIDIA graphics
driver software before installing updated graphics drivers.
1 Follow the instructions on the NVIDIA.com Web site driver download page to locate
the appropriate driver to download, based on your hardware and operating system.
2 Click the driver download link.
The license agreement dialog box appears.
3 Click Accept if you accept the terms of the agreement, then either open the file or save
the file to your PC and open it later.
Opening the EXE file launches the NVIDIA InstallShield Wizard.
4 Follow the instructions in the NVIDIA InstallShield Wizard to complete the
installation.
Quadro K5000/K6000
Available Digital Connectors
Quadro K4000
Available Digital Connectors
To Next Page
Loading...
Need help?
General