Quadro Sync DU-06574-001_v01 | 30
IMPORTANT SAFETY INFORMATION
NVIDIA products are designed to operate safely when installed and used according to
the product instructions and general safety practices. The guidelines included in this
document explain the potential risks associated with equipment operation and provide
important safety practices designed to minimize these risks. By carefully following the
information contained in this document, and the specific instructions provided with
your product, you can protect yourself from hazards and create a safer environment.
The product is designed and tested to meet IEC-60950-1, the Standard for the Safety of
Information Technology Equipment. This also covers the national implementation of
IEC-60950-1 based safety standards around the world e.g. UL-60950-1. These standards
reduce the risk of injury from the following hazards:
Electric shock: Hazardous voltage levels contained in parts of the product
Fire: Overload, temperature, material flammability
Mechanical: Sharp edges, moving parts, instability
Energy: Circuits with high energy levels (240 volt amperes) or potential as burn
hazards
Heat: Accessible parts of the product at high temperatures
Chemical: Chemical fumes and vapors
Radiation: Noise, ionising, laser, ultrasonic waves
Retain and follow all product safety and operating instructions. Always refer to the
documentation supplied with your equipment. Observe all warnings on the product and
in the operating instructions.
CAUTION: Failure to follow these safety instructions could result in fire, electric
shock, or other injury or damage.
To Next Page
Loading...
Need help?
General
