Figure 60. Lateral view showing standoff screws
3. The assembly, setup, and programming of the boards is completed by wiring the TWR-KM3x to the i.MX RT106x
through the NFC board headers. Figure 61 shows the wiring of TWR-KM3x boards for 75 MHz and Figure 62 for 50
MHz.
Figure 61. Wiring the TWR-KM3x to the i.MX RT106x
NXP Semiconductors
Board setup, wiring, and assembly
NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022
User Guide 44 / 64
To Next Page
Loading...
