NXP Semiconductors PN7462AU - User Manual

UM10883
PN7462 family Quick Start Guide - Development Kit
Rev. 1.6 — 14 May 2018
319816
User manual
COMPANY PUBLIC
Document information
Info
Content
Keywords
PN7462 family, Development Kit, Customer board, Quick Start Guide,
functional description of the customer board, NFC Cockpit
Abstract
This document describes PN7462 Controller Development Kits. It also
describes PN7462 software stack, gives directions to run example
application using the MCUXpresso IDE. Document provides PN7462
customer board configuration instructions, gives board hardware
overview and provides basic steps how to use NFC Cockpit application.

NXP Semiconductors PN7462AU Specifications

General

Series	PN7462
Core Processor	ARM Cortex-M0
Core Size	32-Bit
Operating Frequency	20 MHz
Flash Memory	256 KB
RAM	32 KB
I/O Pins	40
ADC	12-Bit
Program Memory Type	Flash
Oscillator Type	Internal
Operating Temperature	-40°C to +85°C
Mounting Type	Surface Mount
Communication Interfaces	I2C, SPI, UART
Connectivity	NFC
Peripherals	Timer, PWM

Summary

2. Hardware overview of the PNEV7462 B board

2.2 PNEV7462 B board

Details the components and blocks of the PNEV7462B evaluation board.

2.2.1 Power circuitry

Describes the power circuit of the PNEV7462B board, including power options.

2.2.2 PN7462 AU block

Details the PN7462AU microcontroller features, core, RF interface, and peripherals.

2.2.6 Antenna coil and related matching circuit

3. Configuration of the PNEV7462 B board

3.1 Board power settings

3.2 Host interface configuration

Details how to configure the PN7462AU for different host interfaces (USB, HSUART, SPI, I2C).

3.2.2 Debug interface

4. Hardware overview of the PNEV7462 C board

4.2 PNEV7462 C board overview

4.2.2 PN7462 AU block

4.2.4 Antenna coil and related matching circuit

5. Configuration of the PNEV7462 C

5.2 PN7462 AU IC power supply options

5.5 Host interfaces

Details PN7462AU host interfaces (USB, HSUART, SPI, I2C) and connections.

5.6 Debug interface

8. Managing the PN7462 family SW projects with MCUXpresso IDE

8.2 Installation of the MCUXpresso IDE

Guides through downloading and installing the MCUXpresso IDE.

8.5 Importing provided SW example projects

8.7 Running and debugging the example projects

Guides on running and debugging example applications using MCUXpresso IDE.

9. PN7462 AU software examples

9.2 PN7462 AU_ex_phExMain - (CLIF + CTIF functionality)

Main example demonstrating CLIF and CTIF functionalities, reader, peer-to-peer, and card modes.

9.2.5 MIFARE Classic

9.3 PN7462 AU_ex_phExEMVCo (CLIF + CTIF functionality)

Implements EMVCo polling and EMV transactions, based on NFC Reader Library.