NXP Semiconductors S32K116 EVB - Page 17

EXTERNAL USE
16
The FreeMASTER JumpStart project description
Links to S32K1xx docs:
 Fact Sheet
 Data Sheet
 Reference Manual
 Product Brief
 S32K116EVB schematic
 S32K116EVB Quick Start
Guide
 Tools:
 FreeMASTER
 S32 Design Studio IDE
 S32K116EVB JumpStart
source files
Pins of the J2 and J1 connectors are configured as outputs. By
single click on each pin you can change their logical level to log0
or log1. User can connect e.g. LED diodes to these ouput pins.
Pins of the J3 and J4 connectors are configured as inputs.
Logical level (log0/log1) is visualised for all connector pins.
User can connect e.g. push-button keyboard to these input pins.
RGB
LED
Potentiometer
Touch Sense Electrodes
Mechanical
Buttons