NXP Semiconductors UM11483 - AW-CM358-Usd Module Setup with I.MX 8 M Quad

NXP Semiconductors
UM11483
Getting Started with NXP-based Wireless Modules on i.MX 8M Quad EVK Running Linux OS
3.4.7 AW-CM358-uSD module setup with i.MX 8M Quad
Plug AW-CM358-uSD module into the SDIO card slot of the i.MX 8M Quad board.
[ 3632.632050] mmc1: new ultra high speed SDR104 SDIO card at address
0001
Connect the antenna.
Use a Micro USB to USB cable to connect i.MX 8M Quad EVK to the host computer
running on Linux OS.
Figure 10. AzureWave AZ-CM358-uSD module and i.MX 8M Quad EVK setup
UM11483 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
User manual Rev. 2 — 21 January 2021
15 / 41