Need help?Do you have a question about the NXP Semiconductors MPC5748G and is the answer not in the manual?
General| Brand | NXP Semiconductors |
|---|---|
| Model | MPC5748G |
| Category | Microcontrollers |
| Language | English |
Compares LCEVB features to the customer EVB, aiding code compatibility.
Guides users on connecting and managing the LCEVB's power supply requirements.
Details the 2.1mm power connector and its correct polarization.
Explains the operation of the slide switch for EVB power control.
Describes the reset circuitry, including the switch and reset output buffering.
Explains the meaning of the yellow and red LEDs for reset status indication.
Details the external crystals used for MCU clock generation.
Provides information on the 14-pin JTAG connector for debugging.
Lists the specific pin assignments for the JTAG debug connector.
Describes the two CAN interface circuits and their connection headers.
Explains the two LIN transceiver circuits and their connection headers.
Covers the USB to RS232 serial interface for PC communication.
Details the Type A USB Host interface for connecting external USB devices.
Describes the Ethernet interface circuitry configured for MII mode.
Explains the two FlexRay interfaces and their connection headers.
Details the GPIO matrix for accessing available general-purpose I/O pins.
Describes the two pushbutton switches for user input.
Explains the hex encoded rotary switch for binary value input.
Details the four user LEDs for status indication.
Describes the potentiometer for providing an analog input to the MCU.
To Next Page