6
61601101901
Safety Considerations
Improper installation, adjustment, alteration, service, main-
tenance, or use can cause explosion, fire, electrical shock, or
other conditions which may cause death, personal injury or
property damage. Consult a qualified installer, service
agency or your distributor or branch for information or assist-
ance. The qualified installer o r agency must use factory-au-
thorized kits or accessories when modifying this product.
Refer to the individual instructions packaged with the kits or
accessories when installing.
Follow all safety codes. Wear safety glasses, protective
clothing, and work gloves. Have a fire extinguisher available.
Read these instructions thoroughly and follow all warnings
and cautions included in literature and attached to the unit.
Consult local building codes and the current edition of the
National Electrical Code (NEC) NFPA 70.
In Canada, refer to the current editions of the Canadian Elec-
trical Code CSA C22.1.
Recognize safety information.
When you see this symbol
on the unit and in instructions or manuals, be alert to the
potential for personal injury. Understand these signal words:
DANGER, WARNING, and CAUTION. These words are
used with the safety-alert symbol. DANGER identifies the
most serious hazards which will result in severe personal
injury or death. WARNING signifies hazards which could
result in personal injury or death. CAUTION is used to
identify uns afe practices which may result in minor personal
injury or product and property damage. NOTE is used to
To Next Page
Loading...
