60
61601101901
Airflow
Upon a first time start-up of the O bserver
®
Control, the fur-
nace DIP switch settings will be copied to the furnace setup
menu. Any changes can then be made from the Observer
Control.
Heating Airflow
Furnace / Fancoil Heating Airflow
Selects the airflow of the indoor unit when heating. EFFI-
CIENCY is the airflow used to meet specified ratings, COM-
FORT is a decreased airflow used to increase the output air
temperature and provide increased comfort.
COMFORT (default)
EFFICIENCY
MIN CFM (modulating furnace only) – runs the modulating
furnace at the minimum CFM
MAX CFM modulating furnace only) – runs the modulating
furnace at the maximum CFM
To Next Page
Loading...
