Oce Eco Solvent CS9350 - Sleep Mode Menu; Version Menu

CS9350 OPERATION MANUAL
5-136
5.5 Version menu
Displays the versions of the firmware.
5.6 Sleep Mode menu
Sleep mode settings are configured.
When you activate sleep mode, the printer operates as follows.
• The vacuum fan stops.
• All heaters stop.
• All lamps turn off except for the power lamp.
• Automatic head cleaning is performed after the time set in the Timer Setting Menu has elapsed.
5.6.1 Timer Setting menu
TIP
 The cleaning mode reflects the settings in the operation panel.
6.2.3 Head cleaning
Setup item Setting Description
Ve r. M / C *.**(Main side)/
*.**(Controller side)
Displays the versions of the firmware of the main side (M) and
controller side (C).
— •[Cancel] key: shifts to the previous menu.
5 Panel setup menu
Setup item Setting Description
Sleep Mode Set Timer Set the auto cleaning interval of this printer for Sleep Mode.
5.6.1 Timer Setting menu
Start Activate Sleep Mode
5.6.2 Sleep Mode Start menu
— •[Cancel] key: shifts to the previous menu.
5.1 Setup menu