CS9350 User’s Guide
4-72
4.1.4 Printing area
The printable area of this printer is as follows.
4.1.5 Head height adjustment
Printing with high printing rate or using strongly-curved media can cause print heads to rub.
Changing the distance from the print head surface to media (head height) may allow you to avoid
headrub.
Head height can be changed to two levels.
Follow the procedure below to change the head height.
a
c
bd
Printable Area
a=Max. 15mm
b=5mm to 25mm
c=5mm
d=5mm to 25mm
Media feeding direction
To Next Page
