CS9350 User’s Guide
4-82
Step 4: The setting in the blinking part on the LCD monitor of the operation panel can be changed.
Press the [+] key or [-] key to change the set value.
Step 5: To save the changed setting, press the [Enter] key on the operation panel.
• The setting is saved and the next setup item is displayed.
If you press the [Cancel] key, [+] key or [–] key without pressing [Enter] key after changing
a setting, the change will not be saved.
Step 6: Press the [Cancel] key on the operation panel to exit from the setup.
• The previous setup menu is displayed.
• When the main menu is displayed, the screen turns to Normal.
To Next Page
