Why is punching not working on my Oce im3512?
If punching does not occur when a saddle stitch finisher is installed on your Oce All in One Printer, ensure that the "Punch" checkbox is selected in the printer driver. Also, punching may be disabled in the administrator settings.
Why is not all of the image is printed by my Oce im3512 All in One Printer?
If not all of the image is printed by your Oce All in One Printer, it may be due to multiple applications running simultaneously. Close any unused applications and attempt to print again.
Why is my Oce im3512 asking for a password?
If your Oce All in One Printer is requesting a password, it's likely because a password was set for the retention function. A password is required to proceed with printing. If you don't know the password, printing cannot be executed.
Why is stapling not working on my Oce im3512?
If stapling does not occur with your Oce All in One Printer, stapling might be disabled in the administrator settings. Check with your administrator to see if "Disabling of Stapler" has been enabled. Also, verify that you are not trying to staple more than the maximum number of pages.
Why the Oce im3512 All in One Printer driver cannot be installed?
If your Oce All in One Printer driver cannot be installed, it may be due to insufficient free space on your hard drive. Delete unneeded files and applications to increase available space. Alternatively, the operating system you are using may not be supported. Ensure your OS is supported.
Why are the edges of the printed image missing on my Oce im3512 All in One Printer?
If the edges of the printed image are missing when using your Oce All in One Printer, it could be due to the image overlapping the non-printable margins of the paper. Try adjusting the print area to fit within these margins.
How to resolve Oce All in One Printer write error when printing from USB?
If your Oce All in One Printer is experiencing a write error when printing from the USB port, the timeout setting for the printer driver might be too short. Try setting a longer timeout duration in the printer driver settings.
How to correct the orientation of the image on my Oce All in One Printer?
If the orientation of the image is incorrect on the print from your Oce All in One Printer, the print orientation settings in the printer driver may be incorrect. Correct the orientation settings directly in the printer driver.
Why is the printed image cut off by my Oce All in One Printer?
If the printed image from your Oce All in One Printer is cut off, it is possible that an incorrect ratio has been selected. To resolve this, select a suitable ratio when printing.
How to fix Oce All in One Printer that prints in reverse order?
If your Oce All in One Printer prints in reverse order, the reverse page order setting might be enabled in your software application. Disable this setting in the application software to print in the correct order.
Provides an overview of the Océ digital multifunction copier and important preliminary reading.
Details the various functions and capabilities of the digital multifunction copier.
Identifies and explains the external and internal components of the machine.
Describes the procedure for turning the machine's power on and off safely.
Explains how to use the auditing mode for tracking usage by account.
Outlines essential safety measures to prevent hazardous radiation exposure from the laser unit.
Provides an overview of the Océ digital multifunction copier and important preliminary reading.
Details the various functions and capabilities of the digital multifunction copier.
Identifies and explains the external and internal components of the machine.
Describes the procedure for turning the machine's power on and off safely.
Explains how to use the auditing mode for tracking usage by account.
Describes the duplex module for automatic two-sided printing and its specifications.
Details the mail-bin stacker, an output sorter with multiple bins.
Explains the finisher's capabilities for collating, sorting, and stapling copies.
Describes the saddle stitch finisher for binding prints with staples and folding.
Explains how to use the automatic document feeder for scanning multiple pages.
Provides guidance on correctly placing originals on the document glass or feeder.
Details the basic procedures for making standard copies using the machine.
Explains how to select and adjust exposure modes for optimal copy quality.
Describes how to adjust copy ratios for reducing or enlarging originals.
Provides instructions for copying using special paper types like transparencies and postcards.
Introduces various special copy modes and the general procedure to use them.
Explains how to save and recall frequently used copy settings as job programs.
Describes how to interrupt a current copy job to perform another task.
Details procedures for cleaning the document glass and automatic document feeder.
Offers solutions for common problems encountered during copying operations.
Provides a general overview of the document filing function and its data flow.
Explains how to operate the machine for document filing, including the control panel.
Details methods for saving scanned documents as image files, including Quick File and Filing.
Describes how to search for, call up, and use saved document files.
Explains how to create, edit, and delete user names and custom folders for document filing.
Guides users on how to enter text, numbers, and symbols in setting screens.
Addresses common problems encountered when using the document filing function.
Provides detailed technical specifications for the machine and its components.
Shows possible system configurations and compatible combinations of peripheral devices.
An alphabetical index of topics covered in the manual for quick reference.
General| Print Technology | Laser |
|---|---|
| Scanning Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Duplex Printing | Yes |
| Fax Transmission Speed | 33.6 Kbps |
| Functions | Print, Copy, Scan |
| Print Speed (Black) | 35 ppm |
| Connectivity | USB, Ethernet, Wi-Fi |
| Scanner Type | Flatbed, ADF |
| Copy Speed | 35 cpm |
| Operating System Compatibility | Windows, macOS |
| Power Consumption | 1, 200 W (max) |
To Next Page
