Section 7 COPIER MANAGEMENT FUNCTIONS
7-40-2
Default setting
Changing the energy-
saving mode
Description
Changes the energy-saving mode that will be entered
into when the [Energy Saver] key is pressed.
(See “5. Energy-saving modes” on page 4-11 for more
information.)
* This setting is displayed when the optional Printer Kit
or Printer/Scanner Kit is installed.
If you are using a standard copier, or if the optional Fax
Kit is installed in your copier, you can press the
[Energy Saver] key to engage the Low power mode.
Available
settings
Low power mode
Sleep mode
Factory
setting
Low power
mode
Reference
page
7-58
To Next Page
Loading...
