Oce PRISMAproduction - SPSPRINT; Setupxxx Supported Parameters

Installation and Customization
U20944-J-Z247-6-7600
/* Statement 2 */ KEYWORD1(value1,...,valuen) KEYWORC
D2(value1,...,valuen) /* Possible comment */ KEYWORDN(valC
ue1,...,valuen) /* Possible comment */
/* The following statement illustrates comment continuation */
/* situations. This comment is 1 null control statement of 1 line C
and 1 null control statement of 2 lines */
/* Statement 3 */KEYWORD1(value1,...,valuen)/* Possible continued C
comment */ KEYWORD2(value1,...,valuen) /C
* Possible continued comment */ KEYWORDn(value1,...,valuen)
/* End of Statement Syntax Example */
Figure 12: Statement Syntax Examples.
SPSPRINT / SETUPxxx supported parameters
PRT(printer name ) Is the device name defined to the spooling system that
ROUTER will control.
(Required)
JES2 - Must correspond to the JES printer name
CUU( RTnn ) Is a unique name within the group of devices defined
within this SPSPRINT member.
RTnn – the first 2 characters must be RT nn can be
any number between 00-99
(Required)
LSCODE( license code file
name )
A „License Key“ is required to function in Production
mode. ROUTER has a DEMO mode that is activated
when no license key is present.
In DEMO mode a transmission will be terminated and
the dataset returned to the spooling system in HOLD
status following the transmission of 3500 records.
(Required)
MSGSU( MSGSURTR ) The supplied MSGSU table must be used.
(Required)