Oce PRISMAproduction - Msgsuxxx Member Parameters; Create the PP;ROUTER Router Control Table

Installation and Customization
U20944-J-Z247-6-7600
SETUP( setup member name ) This file is optional and has the following parameter
support. They define the defaults for the FSA that will be
used for all jobs transmitted by this FSA when those
parameters that are possible to be given at a job level
are not given, these parameters are identified by (JCL)
following the parameter and have a higher priority as the
parameters in the setupxxx member.
Defaults for parameters are underlined.
DRIVER(driver name PPROUTER
)
PPRTRPPX(print parm exit name PPRTRPPX
)
CMDIF( MODIFY
| WTOR )
TRACELEV( 0
-4 )
TRACETYPE( ALL
| INITERM | REQFLOW | PS |
DISPAT | INVRET | PDS | ORDER | SOCKET )
TRACEFILE( GTF | USER
)
TRACESET( FF,FF,FF,FF,FF,FF,FF,FF
)
DUMP( YES
| NO )
CHARS( font name ) (JCL)
FORMDEF( formdef name ) (JCL)
PAGEDEF( pagedef name) (JCL)
MSGSUxxx member parameters
The MSGSUxxx parameter member which is installed into the SAMPLIB must be used for
all the PP/ROUTER printers in the installation.
Create the PP/ROUTER Router control table
When a dataset has been selected from the spool system for distribution the router control
table is referenced. A matching group entry is sought, the basis being a valid combination
of DEST, CLASS and FORMS entries from the datasets output characteristics. Having