Oce PRISMAproduction - 8 JCL Parameters; Os;390 (Mvs)

Maintenance
U20944-J-Z247-6-7600
8 JCL parameters
OS/390 (MVS)
You specify the JCL parameters described in this section on one or both of the
following JCL statements:
DD statement
OUTPUT statement
If you specify the same parameter on both the DD and
the OUTPUT JCL statements, the parameter on the DD statement is used.
These JCL parameters are used to build a header file that is transmitted to the ROUTER
server together with the spool data. The server stores this header file in reference to the
print data for later printing.
The following JCL parameters are supported:
ADDRESS=(address_lines)
BUILDING=building
CHARS=(font_names)
CKPTSEC=seconds
CLASS=class
COPIES=nnn
DATACK={BLOCK | UNBLOCK | BLKCHAR | BLKPOS }
DCB=OPTCD=J
DCB=RECFM={A | M}