Maintenance
U20944-J-Z247-6-7600
If the name used is not PPRTRPPX which is the default, then the SETUPxxx parameter
entry PPRTRPPX(exitname) must be coded.
VSE
A Sample source exit is loaded into the sample library from the install tape – PPRTRX01.
This sample exit builds an –opa string of device_name=PRTnnnn ,outgrp_name=nn
The input buffer that is passed to the exit contains access points to the following VSE
fields:
JECL statements
OPTB parameters
Refer to the sample exit for a full explanation of the INPUT/OUTPUT requirements of the
exit.
To install the Print Parameter Exit complile and link edit the suplied sample into a library
that is available to the PP/ROUTER partition.
If the name used is not PPRTRPPX which is the default, then the SETUPxxx parameter
entry PPRTRPPX(exitname) must be coded.
To Next Page
Loading...
