Maintenance
U20944-J-Z247-6-7600
the dynamic close operation and automatically issues the TINT command to write the
internal trace table into the trace files.
The format of this command is:
F procid,PRTx,TCLO for CMDIF(MODIFY)
or
R xx,TCLO for CMDIF(WTOR)
TDIS Command
This command requests that SPS should display the status of the trace environment via
message SPS0266I.
The format of this command is:
F procid,PRTx,TDIS for CMDIF(MODIFY)
or
R xx,TDIS for CMDIF(WTOR)
Please see the description of message SPS0266I in the SPS/MVS-APA Messages Guide
for more information about this command.
TINT Command
This command requests that SPS write its internal trace table into the trace file (trace level
2 is required).
Events from some special components of SPS are only traced in the internal trace table
(JES X-memory routines, open/close/put routines). The TINT command is automatically
executed at normal and abnormal termination time and before the trace files are closed
via the TCLO command.
The format of this command is:
F procid, PRTx, TINT for CMDIF(MODIFY)
or
R xx, TINT for CMDIF(WTOR)
TLEV Command
This command requests that SPS change the trace level specification (see TRACELEV
keyword from SETUPxxx). The trace level controls the amount of information traced.
To Next Page
Loading...
