Oce TDS450 - Work with Océ Scan Manager

Work with Océ Scan Manager
Work with Océ Scan Manager
Introduction
The Océ Scan Manager is an application available only local on the Océ
Power Logic® controller. With the Océ Scan Manager you can configure
the destinations (places to which a file is scanned) for scan-to-file. To
increase your productivity you can define automatic file naming. During
scan to file, Océ Scan Manager displays the file name and the status of
the file generation process. When the scan is completed a view of the
scanned image is automatically displayed on the controller. The following
figure shows the Océ Scan Manager application.
The left part displays a tree view containing folders containing
destinations. The right part displays a table view containing the content
of the folder currently selected.
Note: Not all options are available to all users. You must log on as a
particular user to perform specific tasks with Océ TDS450 Océ Scan
Manager.
30