Oce TDS450 - Page 32

Work with Océ Scan Manager
Delete a destination (Only available in Key Operator or Repro
Operator mode)
1. Select a destination.
2. Open the file menu and select Delete or click the Delete button on the
toolbar.
Lock a destination (Only available in Key Operator mode)
1. Select a destination.
2. From the ‘File’ menu select ‘Properties’.
3. Check the ‘Locked’ check box.
4. Click Ok to accept the destination settings.
Modifications are now only allowed by the Key Operator.
Unlocking a destination can only be done by the Key Operator.
View a scanned file
1. Select a file from the right panel.
2. From the ‘File’ menu and select ‘View’ or click the ‘View’ button on the
toolbar.
Océ View Station LT starts up and displays the file.
Print a scanned file
1. Select a file from the right panel.
2. From the ‘File’ menu select ‘Print’ or click the ‘Print’ button on the
toolbar.
The selected file will be printed with the default settings as defined in
the Océ Settings Editor.
Delete a scanned file
1. Select a file from the right panel.
2. From the ‘File’ menu select ‘Delete’ or click the ‘Delete’ button on the
toolbar.
View properties of a scanned file
1. Select a file from the right panel.
2. From the ‘File’ menu select ‘Properties’ or click the ‘Properties’ button
on the toolbar.
The Scan-file properties window will appear.
Automatically view a file after scanning
1. From the ‘System’ menu select ‘Auto view’.
2. When you scan, Océ View Station LT starts automatically and
displays the scanned file.
32