Oce TDS450 - Page 34

Work with the Settings Editor
5. Update the setting in the update area, as required.
6. Click on the ‘Apply’ button.
The new value is now applied for the setting.
7. Log off from log off the Key Operator mode when you have finished
updating the settings.
Administrator settings
A System Administrator can configure default printer language (PDL)
settings and printer pen settings. Also system and connectivity
settings can be configured.
The procedure to make Administrator settings is as follows:
1. Maximize the Océ Settings Editor on the screen.
2. Log on as System Administrator.
3. Click on one of the top buttons to display the desired group of
settings.
4. Select the setting you want to update in the tree structure.
Note: See the user manual for a description of all the possible
Administrator settings.
5. Update the setting in the update area, as required.
Note: A few settings, such as the default pen settings, are made
directly from the tree structure area.
6. Click on the ‘Apply’ button.
The new value is now applied for the setting
7. Log off from the System Administrator mode when you are finished
updating settings.
34