Oce TDS450 - Page 36

Add an Océ TDS system
1. Open the ‘File’ menu and select ‘Connect to’.
A dialogue box will appear with a drop-down list box containing the
already added Océ TDS systems.
2. Click ‘Edit...’. The ‘Edit systems’ dialogue box appears.
3. Enter the IP address or the name of the Océ TDS system you want to
connect to, in the ‘Systems’ text box.
4. Click ‘Add’. The system is added to the list.
Note: You can also remove an Océ TDS system. Select one in the list
and click ‘Remove’.
5. Click OK twice to return to the application.
Connect to an Océ TDS system
1. Open the ‘File’ menu and select ‘Connect to’.
A dialogue box will appear containing a drop-down list box with the
available Océ TDS systems.
2. Select one of the available Océ TDS systems and click on ‘OK’. When
you connect to another system, all settings have to be retrieved. This
may take some time.
36