FM Radio Mode Operation
To switch to FM mode, press the <Mode> button repeatedly to highlight
the FM mode.
Auto scan
Press <Scan> button, the radio will scan the next available
station.
Manual tune buttons
To fine tune the frequency manually, use the ▲ or ▼ button.
The frequency will be tuned up or down by 0.05MHz.
Menu Button
There are some settings available under FM. Press <Menu>
button to select follow options:
Ÿ Scan setting
Ÿ Audio setting
Ÿ System setting
Ÿ Scan setting
There are two types of scan available. The scan is
done according to “Strong station only” or “All station”.
If ‘strong station only’ is selected, it will scan only the
channels with strong reception signal where the radio
is placed. If “All station” is selected, it will scan out
both the strong and weak channels.
Ÿ Audio setting
Use the ▲ or ▼ to choose “Stereo allowed” or “Forced
mono”.
Ÿ System setting
The following options are available under FM mode:
‒ 9 –
To Next Page
Loading...
