Setting of Alarm
1. Press <Alarm1> or <Alarm 2> button to start the setting. Setting
can be done in Standby too.
2. Press <Select> to set the Alarm Off or ON.
3. Press ▲ or ▼ to go to next setting.
4. Frequency: Daily, Once, Weekends or Weekdays.
5. Wake up time: Press <Select> button, use ▲ or ▼ to set the hour,
press <Select> to skip to the minute setting then press <Select>
again to confirm.
6. Source: You can set the alarm sound source as Buzzer, Digital
Radio (DAB) or FM. If you choose sound source of Digital Radio
(DAB) or FM, an additional option ‘Preset’ will pop up for you to
select whether to use the “Last listened” or from “Preset station”.
7. Preset: Either set the wake to DAB or FM by “Last listened” station
or from “Preset station” station.
8. Duration: You can set the alarm duration in the range of 15 minutes
to 120 minutes.
9. Volume: You can set the alarm sound level as you prefer.
10. To cancel the alarm, press the <Alarm 1> or <Alarm 2> or <Power>
button.
‒ 12 –
To Next Page
Loading...
