Ocean Optics NeoFox - Page 37

3: Using NeoFox with NeoFox Viewer Software
013-20000-009-02-201510 29
Calibration Settings:
 Temperature Settings
 Temperature Source
 Fixed Temperature Value
 Calibration Method
 Sensor Type
 Two Point Calibration Settings
 Two Point – Tau0
 Two Point – Tau1
 Two Point – Oxygen 0
 Two Point – Oxygen 1
 Two Point – Slope
 Two Point – Offset
 Two Point – Temperature
 Multipoint Calibration Settings
 12 Multipoint Original Calibration Coefficients : A0, A1, A2, B0, B1, B2, C0, C1, C2, T0,
T1, T2
 12 Single Point Adjusted Calibration Coefficients: A0, A1, A2, B0, B1, B2, C0, C1, C2, T0,
T1, T2
Analog Output Settings:
 Analog Voltage Output Source
 Analog Voltage Lower Bound
 Analog Voltage Upper Bound
 Analog Current Output Source
 Analog Current Lower Bound
 Analog Current Upper bound
Jaz Communication:
 Enable Jaz Interface
Serial and USB Communication:
 RS232 Divisor Latch
 RS232 Divisor Add Value
 RS232 Divisor Mul Value
 RS232 Enable
 Uart Data Copy Type
 Uart Data copy Mode
 Uart Transmission Mode
 Uart Send Alerts