Ocean Optics QE Pro - About This Manual; Document Purpose and Audience; Whats New in this Document; Document Summary

891-00000-000-02-201603 iii
About This Manual
Document Purpose and Intended Audience
This document provides the user of the QE Pro Spectrometer with instructions for setting up, calibrating
and performing experiments with their spectrometer.
What’s New in this Document
This version of the QE Pro Scientific-grade Spectrometer, Installation and Operation Manual updates
information about the optional shutter.
Document Summary
Chapter
Description
Chapter 1: Introduction
Contains descriptive information about the QE Pro Spectrometer and
how sampling works. It also provides a list of system requirements,
interface options, and shipment components.
Chapter 2: Installing the QE Pro
Provides installation and configuration instructions.
Chapter 3: Troubleshooting
Contains recommended steps to isolate and correct common
problems.
Appendix A:Calibrating the
Wavelength of the QE Pro
Provides instructions for calibrating the QE Pro Spectrometer.
Appendix B: Specifications
Contains technical specifications and connector pinouts for the QE
Pro Spectrometer.
Product-Related Documentation
You can access documentation for Ocean Optics products by visiting our website at
http://www.oceanoptics.com. Select Support Technical Documents, then choose the appropriate
document from the available drop-down lists.
Document for…
Document Location
OceanView software
http://oceanoptics.com/wp-content/uploads/OceanViewIO.pdf
HR-4 Breakout Box
http://oceanoptics.com/wp-content/uploads/HR-4-Breakout-Box.pdf
External triggering
http://oceanoptics.com/wp-content/uploads/External-Triggering-
Options_Firmware3.0andAbove.pdf
Device driver issues
http://oceanoptics.com/wp-content/uploads/Correcting-Device-Driver-Issues.pdf