Oceanic ATOM - Page 120

120
GAS 3 SWITCH PREVIEW DISPLAY
Information includes (Fig. 112) -
> Transmitter Link icon (if the Transmitter is active)
> Bar Graph, representing Nitrogen Loading.
> Alpha graphic GAS3
> Alpha graphic ANALOG, if TMT3 is not available
> FO2 value Set Point for Gas 3 and the symbol FO2
> Current Depth and symbol FT (or M)
> Symbol NITROX
• While viewing the Dive Mode Main Display, press/release
the M button momentarily (< 2 seconds) to access the se-
quence of available Gas Switch Preview Displays.
• Press/release the M button repeatedly (< 2 seconds each
time) until the GAS 3 Switch Preview screen is displayed.
SWITCHING FROM GAS 2 TO GAS 3
• Depressing the M button for 2 seconds while viewing the
GAS 3 Switch Preview display will manually Switch the
ATOM from GAS 2 to GAS 3 and the Receiver from Transmit-
ter 2 to Transmitter 3 (if active).
• When the switch is made, the Main Display will then repre-
sent GAS 3. Alternate Display #1 will then display the alpha
graphic TMT3 and the Pressure of Tank 3 (Fig. 113). Air
Time Remaining is then calculated based on Tank 3.
• A Switch Back to GAS 2 can be performed, as previously
described for switching GAS 2 Back to GAS 1.
Fig. 112 - GAS 3 Switch
Preview
Fig. 113 - Switch from GAS 2
to GAS 3 was made