Why is the battery symbol flashing on my OHAUS Scales?
If the battery symbol is flashing on your OHAUS Scales, it indicates a low battery. For the i-DT33P model, replace the dry batteries. For the i-DT33XW model, recharge the battery.
What does CAL E mean on OHAUS Scales?
If your OHAUS Scales display CAL E, it means the calibration value is outside allowable limits. Use the correct calibration weight to resolve this.
What does REF Err mean on OHAUS Scales?
If your OHAUS Scales display REF Err, the average piece of weight (APW) on the pan is too small and less than 0.1d. Replace the batch of samples with a heavier one, or change to a scale with readability suitable for your samples.
How to fix OHAUS Measuring Instruments when it is unable to turn on?
If the OHAUS Measuring Instruments indicator won't turn on, check the power cord connections to ensure it's properly plugged into both the device and the power outlet. Verify that the power outlet is supplying electricity. If using battery power, recharge the battery. If none of these steps work, service may be required.
Why OHAUS Measuring Instruments cannot display weight in desired weighing unit?
If your OHAUS Measuring Instruments cannot display the weight in the desired weighing unit, the unit may be disabled. Enable the unit in the Units Menu. Refer to Unit Menu section for help.
General| Capacity | 33 kg |
|---|---|
| Readability | 0.1 g |
| Display | LCD with backlight |
| Power Supply | AC adapter or rechargeable battery |
| Approval | OIML, NTEP |
| Application | Weighing, Parts Counting, Checkweighing |
| Construction | Stainless Steel |
| Calibration | External calibration |
| Communication | RS232, USB |
| Design Features | Overload protection |
| Units | g, kg, lb, oz |
| Operating Temperature | -10°C – 40°C |
To Next Page
