What does Error 8.1 mean on OHAUS Scales?
If your OHAUS Scales display Error 8.1, it indicates that the weight reading exceeds the Power On Zero limit. Remove weight from the pan. If the issue persists, recalibrate the scale.
What does error 8.4 mean on OHAUS Scales?
If your OHAUS Scales show Error 8.4, the weight reading is below the Underload limit. Add weight to the pan. If the problem continues, recalibrate the scale.
What does Error 8.2 mean on OHAUS Scales?
If your OHAUS Scales display Error 8.2, it means the weight reading is below the Power On Zero limit. To fix this, add weight to the pan. If the issue remains, recalibrate the scale.
What does error 8.8 mean on OHAUS Scales?
If your OHAUS Scales display Error 8.8, the factory calibration data in the EasyConnectTM module on the load cell cable is not valid under LFT off status. Calibrate the scale to resolve this.
What does error 8.9 mean on OHAUS Scales?
If your OHAUS Scales display Error 8.9, it indicates a failure to read the serial number from the EasyConnectTM module, or the serial number does not match the LFT ON status. You can break the seal or replace the original base/indicator. If the issue persists, service is required.
What does error 9.5 mean on OHAUS Scales?
If your OHAUS Scales display Error 9.5, it indicates that calibration data is not present. Calibrate the scale to resolve this issue.
What to do if OHAUS Measuring Instruments cannot zero the scale?
If you cannot zero your OHAUS Measuring Instruments scale, first remove any weights from the pan that exceed the allowable limits. Ensure the weight is stable and that there is no excessive vibration or movement around the scale. You may also need to increase filtering. If the issue persists, the load cell may be damaged, requiring service.
Why won't my OHAUS Scales turn on?
If your OHAUS Scales indicator won't turn on, first, check the power cord connections to ensure it's properly plugged into both the scale and the power outlet. Then, verify that the power outlet is supplying electricity. If using battery power, recharge the battery. If none of these steps work, service may be required.
What does CAL E mean on OHAUS Measuring Instruments?
If your OHAUS Measuring Instruments displays CAL E, the calibration value is outside allowable limits. Use the correct calibration weight.
What to do if OHAUS Scales show Error 8.3?
If your OHAUS Scales display Error 8.3, it means the weight reading exceeds the overload limit. Reduce the weight on the pan to resolve this issue.
General| Model | i-DT33XW |
|---|---|
| Display | LCD with backlight |
| Application | Weighing, Parts Counting, Checkweighing |
| Communication | RS232 |
| Tare Range | To capacity by subtraction |
| Calibration | External Calibration |
| Type | Bench Scale |
| Power Supply | AC Adapter |
| Approval | NTEP approved |
| Operation | AC Adapter (Included) |
| Construction | Stainless Steel |
| Design Features | Water-resistant |
| Units | lb, oz, g, kg |
To Next Page
