OHAUS MC2000 - Introduction; Safety Precautions; Installation; Package Contents

MC2000 Moisture Analyzer Series EN-1
1. INTRODUCTION
1.1 Safety Precautions
For safe and dependable operation of this moisture Analyzer,
please comply with the following safety precautions:
 Use the Analyzer exclusively for determination of
moisture in samples. Improper operation of the Analyzer
can endanger personnel and cause property damage.
 If the Analyzer is used in a manner not specified in this
manual, the protection provided may be impaired.
 Do not operate the Analyzer in hazardous, wet or
unstable environments.
 Do not make any modifications to the Analyzer.
 Please remove the batteries if the Analyzer will not be
used for extended periods.
 Service should be performed only by authorized
personnel.
 Please note that changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
2. INSTALLATION
2.1 Package Contents
 Moisture Analyzer
 Container
 200g weight
 Instruction Manual
 Cover
 Brush
 4 AA Batteries
 USB cable
 Bag
2.2 Selecting the Location
 Operate the analyzer on a firm, level surface.
 Avoid locations with rapid temperature changes, excessive humidity
and vibrations.