Appendix A - Moving and transporting > 132
3. Press the cover release (a) and open the top cover (b) fully.
4. Lift the image drum along with the toner cartridge out of the MFP and place it on a
flat table.
WARNING!
If the MFP has been powered on, the fuser will be hot. This area is
clearly labelled. Do not touch.
CAUTION!
The green image drum surface at the base of each cartridge is very
delicate and light sensitive. Do not touch it and do not expose it to
normal room light for more than 5 minutes. Never expose the drum
to direct sunlight or very bright room lighting.
a
b
To Next Page
Loading...
Need help?
General
